CALCULATOR
Waist to Hip Ratio Calculator
Divide your waist by your hip measurement to get the waist-to-hip ratio.
How the calculation works
Waist-to-hip ratio = waist circumference / hip circumference.
Worked example
With waist 85 cm, hip 100 cm, waist-to-hip ratio is 0.85 ratio.
Example scenarios
| Scenario | Waist-to-hip ratio |
|---|---|
| Example: waist 85 cm, hip 100 cm | 0.85 ratio |
| Waist of 95 cm | 0.95 ratio |
| Hip of 110 cm | 0.7727272727 ratio |
What the ratio shows
The ratio compares waist size with hip size, a rough guide to where body fat is carried. The example gives 0.85 ratio. A waist of 95 cm gives 0.95 ratio with the same hip.
Measuring consistently
Measure the waist at the same point each time, usually around the navel, and the hip at the widest point of the buttocks. Small differences in tape position change the ratio.
Frequently asked questions
- How do I calculate waist-to-hip ratio?
- Divide the waist measurement by the hip measurement, in the same units. The example gives 0.85 ratio.
- Do I need to use cm or inches?
- Either, as long as waist and hip use the same unit. The ratio has no unit.
- Does a higher ratio mean a health risk?
- Some guidelines link higher ratios with health risk, but they use different cut-offs. This calculator gives the ratio only and does not diagnose.
- Where should I measure the hip?
- At the widest part of the buttocks, with the tape level. Keep the tape snug without compressing the skin.
- Is it better than BMI?
- It measures a different thing: where weight sits, not the total. Many people use both.
Assumptions and limits
A simple ratio of two tape measurements. Measurement points differ between guidelines, so compare results only with the same measuring method.